Pure manganese phosphating solution IC-2005
First, an overview
IC-2005 is high-temperature manganese phosphating agent, which is
suitable for self-lubricating coating processing of high-speed
operation parts of automotive, motorcycle, shipbuilding , and wear
and corrosion resistant coating process of tools, knives tools and
higher standard parts .
The phosphating solution can form a dense and anti-wear black
phosphate coating on the surface of iron and steel , phosphate
coating is composed of a series of different sizes of crystal, the
connection point of the crystals form tiny crack of porous
The porous crystal structure in the lubricating oil or anti-rust
oil environment can significantly improve corrosion resistance,
adsorption, wear resistance on the surface of steel .
2. Use method
2.1. Prepared Tank solution(1000KG):
pure manganese phosphating solution IC-2005 10%
At first , add more than half water in the phosphating tank, then
add manganese phosphating solution slowly, stir evenly and heat to
the specified temperature.
2.2. Tank solution management
Tank solution management
|Total acidity||30 ~ 40 (measured 36)|
|Free acidity||2.5 ~ 3.5 (measured 2.8)|
15-35 degree C(Dipping)
35-45 Degree C(spraying)
|Specific gravity||1.280 ± 0.05 (measured 1.281)|
Solution supplement and adjustment (calculated by 1 tons):
When the total acidity is low 30 points or free acid is below 2.8
points, add IC 2005 to the bath solution, each 10kg IC-2005, total
acidity increased about 3.5 points, free acid increased about 0.3
Every day remove sediment, change bath about 10 days a time .
Total acidity is not enough,add manganese phosphating solution,
free acid is too high and the neutralizer 0.16kg reduce free acid
3. Package and storage
Package: 200kg/barrel, 30KG/ barrel
Storage: Indoor normal temperature one years.